This is a commercial-grade beer tower. Outstanding quality.
It's the exact same unit you will find in many of your neighborhood taverns.
Mounts to the top of your counter-top or on the top of a small refrigerator.
This draft beer tower is very quick and easy to install.
The bottom flange of the beer tower simply screws to the counter through the provide screw holes.
The screws are then hidden with a chrome collar that slide down over them.
A rubber gasket is included to keep spilled beer or counter cleaners from working its way under the tower's column.
The tower columns is insulated with styrofoam to help keep the beer cold and prevent the tower from sweating.
Column Dimensions: 11-3/4" tall, and 2-1/2" in diameter.
Overall Dimensions: Total height, with tap handle, is approximately 13-3/4". Flange collar is 3-3/4" diameter.
THE BEER TOWER INCLUDES:
One Chrome Faucet with 3" Tap Handle: Attaches easily to the beer tower.
One 5' length of 3/16" I.D. Beer Line: The beer line is already attached to the shank inside the tower.
One Barbed Tail Piece with Winged Beer Nut: Both of these items are already on the beer line and ready to go.
One Beer Washer: This ensures you get a leak-proof seal to the keg tap.
One Rubber Gasket: Provides a seal between the beer tower's flange and your counter-top.
SPECIAL NOTE: This Beer Tower comes with all the fittings you will need to attach it to a commercial beer keg tap. If you plan on using this Beer Tower with Cornelius-Style Kegs instead, you will also need to purchase the appropriate liquid Quick-Disconnect to fit your keg and a hose clamp. This will allow you to attach the Beer Tower's hose to your Cornelius-Style Kegs.